When it comes to portability, versatility and ease of use, few displays can match the Popup™ 10ft (4 quad x 3 quad) straight pop up display. This tension fabric display sets up in seconds, creating a dynamic appearance that can be used in a wide variety of exhibits and environments. The graphic is pre-attached, making assembly fast and simple. Included is a wheeled shipping bag to make transportation quick and easy. Lightweight, aluminum frame can be purchased separately.
- Lightweight 10ft wide (4 quad x 3 quad) straight anodized silver frame
- Grey in-molded hook and loop end caps
- 2 stabilizer feet included
- Supports an integrated fabric graphic mural with or without endcaps
- Easy assembly
- Rolling carry bag included
- Lifetime hardware warranty against manufacturer defects
Compatible with optional LED lighting
FRAME SPECS
Overall Size | 305cm x 228cm / 120 in x 90 in |
Material | Aluminum |
Plastic Bar Length | 28cm / 11 in |
Aluminum Pole Length | 76.2cm / 30 in |
Packing Weight | 9.3kgs / 20.5 lbs |
Packing Size | 35"w x 15"d x 13"h |
Pop-up signage can be assembled by one person, though working with two people is more efficient. With two people, assembly takes around 5 minutes using this method:
Stretch Out Corners: Position the display with hook-and-loop fasteners facing up, then stretch out each corner.
Lock Clips: Lay out the pop-up display frame and lock the clips in place.
Attach Fabric: Secure the fabric to the fastener strip around the display frame.
Raise and Stabilize: Lift the display and attach the stabilizer feet for support.
With proper care and normal usage, the expected lifespan of our hop-up displays is roughly 6 years.
Pop-up signage can be assembled by one person, though working with two people is more efficient. With two people, assembly takes around 5 minutes using this method:
Stretch Out Corners: Position the display with hook-and-loop fasteners facing up, then stretch out each corner.
Lock Clips: Lay out the pop-up display frame and lock the clips in place.
Attach Fabric: Secure the fabric to the fastener strip around the display frame.
Raise and Stabilize: Lift the display and attach the stabilizer feet for support.
Pop-up signage can be assembled by one person, though working with two people is more efficient. With two people, assembly takes around 5 minutes using this method:
Stretch Out Corners: Position the display with hook-and-loop fasteners facing up, then stretch out each corner.
Lock Clips: Lay out the pop-up display frame and lock the clips in place.
Attach Fabric: Secure the fabric to the fastener strip around the display frame.
Raise and Stabilize: Lift the display and attach the stabilizer feet for support.
The 7.5ˈx 7.5ˈm pop-up works well with most standard-size trade show booths, while the 7.5'x10' works well for 10x10 booths and larger.
Yes, we sell replacement graphics if you already own one of our frames. If you own a frame but are unsure if our graphics will fit, please reach out and we can determine if our prints will fit.
Our fabrics are all NFPA701 fire certified.
Airline regulations differ, but for the 7.5' x 7.5' display, the combined weight of the frame, fabric, and case is 28 lbs. For the 7.5' x 10' display, the total weight of the frame, fabric, and case is 35 lbs.
